RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-19

Valid HTML 4.01 Transitional

Icom IC-2300H

A picture of Icom IC-2300H

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: USA
TX: 144-148 MHz
RX: 136-174 MHz
Export
TX: 136-174 MHz
RX: 136-174 MHz
Tuning steps:5 / 6.25 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability:±3 ppm @ -10 to +60°C (14 to 140°F)
Mode:FM / NFM
Channels/memory management: 200 regular
3 scan edge pairs
1 call
Priority watch
Non-volatile EEPROM storage
Repeater shift / offset:±0 to 20 MHz
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 0.4 to 1.5 A
TX: Max 11 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):140*40*118 mm (5.51*1.58*4.6")
Weight:1.1 Kg (2.42 lb)
Other features:CTCSS/PL and DTCS. Weather RX & alert (US version only)




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 46.35 MHz
2nd IF: 450 KHz
Sensitivity:0.18 uV (12 dB SINAD)
Selectivity: FM
12 KHz (-6 dB)
28 KHz (-60 dB)
NFM
6 KHz (-6 dB)
18 KHz (-55 dB)
Image rejection:60 dB
AF output power / speaker:3.5 W at 10% distortion / 4 ohm
External speaker connector:3.5 mm, 4 ohm




TRANSMITTER SECTION
RF output power:

HighMidMid-LoLow 1
2 m:65 W25 W10 W5 W
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions:Better than -60 dBc
Microphone impedance / connector:600 ohm / 8-pin (Modular)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 2011-20xx (Discontinued)
Additional info:
Related documents:User manual (67 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
CS-2300H
HM-133V
HM-154
OPC-347
OPC-440A
OPC-474
OPC-478
OPC-478UC
OPC-589
OPC-1132A
SP-10
Cloning software
Hand microphone with keypad
Hand microphone
DC power cable, 7 m
Mic extension cable, 5 m
Cloning cable (Radio-to-radio)
Cloning cable, RS-232C (Radio-to-computer)
Cloning cable, USB (Radio-to-computer)
Mic adapter cable, 8-pin
DC power cable, 3 m
External speaker