RigPix logo

Icom logo


Back to main

Back to Icom

Next HT/portable


Copyright logo


Last modified 2023-09-18

Valid HTML 4.01 Transitional

Icom IC-202S

A picture of Icom IC-202S

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range:144-146 MHz (VXO 200 KHz segments depending on crystals)
Tuning steps:Analog / continuous
Frequency stability:Less than 200 Hz per hour @ 25°C (77°F)
Mode:USB / LSB / CW
Channels / memory management:None
Repeater shift / offset:No
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 90-250 mA
TX: Max 750 mA
Antenna impedance / connector:50 ohm / SO-239 or built-in telescopic whip
Dimensions (W*H*D):61*183*162 mm (2.4*7.2*6.38")
Weight:2 Kg (4.41 lb), with batteries
Other features:NB. RIT.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 10.7 MHz
Sensitivity:0.5 uV (10 dB S+N/N)
Selectivity:2.4 KHz (-6 dB)
4.8 KHz (-60 dB)
Image rejection:
AF output power / speaker:1 W at ?% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: SSB: 3 W (PEP)
CW: 3 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 4-pin (Metal locking ring connector)
Microphone input level:10 mV typical




MISCELLANEOUS
Manufactured:Japan, 1978-19xx (Discontinued)
Additional info:
Related documents:User manual (9.7 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
BC-15
BC-20
IC-3PS
IC-20L
IC-FA1
IC-SM2
?
?
AC battery charger and 10 NiCd 900 mAh batteries
AC battery charger and 10 NiCd 900 mAh batteries
Power supply. 13.8 VDC, 3 A
Linear amplifier. 10 W
Rubber antenna
Desk mirophone
Mobile mounting bracket
Mobile mounting kit for IC-20L