RigPix logo

Icom logo


Back to main

Back to Icom

Next HT/portable


Copyright logo


Last modified 2026-05-07

Valid HTML 4.01 Transitional

Icom IC-03A

A picture of Icom IC-03A

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: USA
TX: 220-225 MHz
RX: 220-225 MHz
Tuning steps:5 / 10 / 20 / 25 KHz
Frequency stability:±20 ppm @ -10 to +60°C (14 to 140°F)
Mode:FM
Channels / memory management: 10 regular
Repeater shift / offset:Programmable
Power supply:5.5-13.8 VDC (Depending on battery pack)
or 11-16 VDC external (Male barrel jack, center positive)
Current drain / power consumption:RX: 50-170 mA
TX: Max 1.8 A
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):64*158*35 mm (2.52*6.22*1.38")
Weight:515 g (1.13 lb), with BP-3 and antenna
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 16.9 MHz
2nd IF: 455 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Squelch sensitivity:Less than 0.1 uV (Threshold)
Noise figure:
Selectivity:
Image rejection:
AF output power / speaker:500 mW at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm)




TRANSMITTER SECTION
RF output power:

High
@13.8V
High
@8.4V
Low
1.25 m:5 W2 W500 mW
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:TS "Subminijack" (2.5 mm)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 198x-198x (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -