| GENERAL |
| Type: | HF/VHF receiver |
| Frequency range: |
0.54-54 MHz in six bands
0.54-1.35 MHz
1.35-3.45 MHz
3.45-7.4 MHz
7.4-14.8 MHz
14.8-29.7 MHz
29.7-54 MHz
|
| Tuning steps: | Continuous |
| Frequency stability: | 0.01 to 0.001% after 15 minutes warmup |
| Mode: | AM / CW |
| Channels / memory management: |
6 optional
XTAL controlled
|
| Power supply: | Mains: 90-270 VAC (Depending on transformer configuration) |
| Current drain / power consumption: | 130 W |
| Antenna impedance / connector: | 100 ohm / ?, balanced or single wire |
| Dimensions (W*H*D): | 483*267*419 mm (19*10.5*16.5") |
| Weight: | 33 Kg (72.6 lb) |
| Other features: | IF output. 8 Kohm headphone jack. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne (Below 7.4 MHz)
IF: 455 MHz
Double conversion superheterodyne (Above 7.4 MHz)
1st IF: 3.955 MHz
2nd IF: 455 KHz
|
| Sensitivity: |
AM: Better than 2 uV (No reference)
CW: Better than 0.75 uV (No reference)
|
| Selectivity: |
Selectable bandwidths
Non-XTAL filter: 3 / 8 / 13 KHz
XTAL filter: 200 / 500 Hz and 1.3 KHz
|
| Image rejection: | 72-109 dB (Depending on band) |
| AF output power / speaker: | 2.5 W at ?% distortion / No internal speaker |
| External speaker connector: | Screw terminals, 600 ohm |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | USA, 1953-19xx (Discontinued) |
| Additional info: | |
| Related documents: | User / service manual (36.5 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
