| GENERAL |
| Type: | Amateur HF transceiver |
| Frequency range: |
10-80 m in 7 bands
80 m: 3.5-4.1 MHz
40 m: 7.0-7.6 MHz
20 m: 13.9-14.5 MHz
15 m: 21.0-21.6 MHz
10 m A: 28.0-28.6 MHz
10 m B: 28.5-29.1 MHz
10 m C: 29.1-29.7 MHz
|
| Tuning steps: | Continuous |
| Frequency stability: | ±? ppm |
| Mode: | AM / SSB / CW |
| Channels / memory management: |
None
|
| Repeater shift / offset: | No |
| Power supply: | 650 V, 250 V, -45 to -65 VDC and 12.6 V from separate PSU |
| Current drain / power consumption: | 300-500 mA @ 650 V
150-180 mA @ 250 V
5.5 A @ 12.6 V |
| Antenna impedance / connector: | 50 ohm (Nominal) / SO-239 |
| Dimensions (W*H*D): | 273*140*366 mm (10.75*5.5*14.4") |
| Weight: | ? Kg (? lb) |
| Other features: | VOX. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
? conversion superheterodyne
|
| Sensitivity: | 0.5 uV (10 dB S/N) |
| Selectivity: | 2.1 KHz (-6 dB)
7.5 KHz (-60 dB) |
| Image rejection: | |
| AF output power / speaker: | 2 W at ?% distortion / 4 ohm |
| External speaker connector: | |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| Max pwr |
|---|
| AM: | ~50 W (260 W input) |
| SSB (PEP): | ~150 W (300 W input) |
| CW: | ~130 W (260 W input) |
|
| Modulation system: | |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | Hi-Z / 3-pin |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | USA, 1963-196x (Discontinued) |
| Additional info: | |
| Related documents: |
User manual (3.3 MB)
RF driver: 12BY7A
RF finals: Three 12JB6
|
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
34-NB
AC-3
DC-3
MMK-3
MS-3
RV-3
|
Noise blanker
Mains power supply
12 VDC power supply
Mobile mounting bracket
Matching speaker. Can also house AC-3
External VFO with speaker. Can also house AC-3
|
|
