GENERAL |
Type: | Citizen band transceiver |
Frequency range: | 26.6-30 MHz |
Channels / tuning steps: | 6 (Programmable by diode matrix) |
Mode: | FM |
Frequency control: | PLL |
Frequency stability: | ?% |
Clarifier or Delta tune: | No |
Power supply: | 10.8-16 VDC |
Current drain / power consumption: | RX: 130-320 mA TX: Max 1 A |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 155*55*170 mm (6.1*2.16*6.69") |
Weight: | 1.3 Kg (2.87 lb) |
Other features: |
Selcal option
RX and TX are programmed separately, allowing
100 KHz repeater offset on 10 m for ham use. |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz - Ceramic filter: Murata SFR455H
|
Sensitivity: | 0.6 uV (20 dB SINAD) |
Selectivity: | |
Image rejection: | |
AF output power / speaker: | 2 W at ?% distortion / 8 ohm |
External speaker connector: | |
|
|
|
|
TRANSMITTER SECTION |
RF output power: | 4 W |
Modulation system: | |
FM deviation (Factory set): | ±? KHz |
Spurious emissions: | Better than -57 dBm |
Microphone impedance / connector: | 600 ohm / 5-pin DIN (180°) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | 198x-198x (Discontinued) |
Main PCB: | |
Sub PCBs: | |
Additional info: | |
Related documents: |
RF final: 2SC2078
|
Sams Photofact #: | None |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
|