RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Copyright logo


Last modified 2022-01-30

Valid HTML 4.01 Transitional

Team MX-8 Mark 1

A picture of Team MX-8 Mark 1

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver, multinorm
Frequency range
depending on setting:
EC/EU: 26.965-27.405 MHz
EI: 26.965-27.405 MHz
DE: 26.585-27.405 MHz
UK: 27.60125-27.99125 / 26.965-27.405 MHz
PL: 26.960-27.400 / 26.965-27.405 MHz
Channels / tuning steps:40 or 80
Mode:AM / FM
Frequency control:PLL
Frequency stability:?%
Clarifier or Delta tune:No
Power supply:13.8 VDC (Fixed power cord)
Current drain / power consumption:RX: ? mA
TX: Max 1.8 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):145*45*153 mm (5.71*1.77*6.02")
Weight:1 Kg (2.2 lb)
Other features:Channel 9 / 19 priority, Dual watch. Scanning. ASQ.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity: AM: 2.4 uV (20 dB S+N+D/N)
FM: 1.6 uV (20 dB S+N+D/N)
Selectivity:
Image rejection:
AF output power / speaker:1.9 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power: AM: 1 or 4 W (Depending on setting)
FM: 4 W
Modulation system:
Max FM deviation (Factory set):±2 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 6-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:2010-20xx
Main PCB:
Sub PCBs:
Additional info:
Related documents:
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
EBS-MX DIN mounting kit