GENERAL |
Type: | Citizen band transceiver |
Frequency range: | 27.60125-27.99125 MHz |
Channels / tuning steps: | 40 (UK CB 27/81) |
Mode: | FM |
Frequency control: | PLL |
Frequency stability: | Less than 180 Hz @ room temperature |
Clarifier or Delta tune: | ±? KHz |
Power supply: | 11.6-15.6 VDC (Fixed power cord) |
Current drain / power consumption: | RX: 300-750 mA TX: Max 1.3 A |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 175*39*186 mm (6.89*1.54*7.32") |
Weight: | 1.45 Kg (3.2 lb), without mounting bracket |
Other features: | PA. NB. External selcall jack. |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Double conversion superheterodyne
1st IF: ? MHz
2nd IF: ? KHz
|
Sensitivity: | Typically 0.3 uV (12 dB SINAD) |
Selectivity: | 5 KHz (-6 dB) |
Image rejection: | |
AF output power / speaker: | 1.8 W at 10% distortion / 8 ohm |
External speaker connector: | 3.5 mm, 4-8 ohm |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
Hi: 4 W
Lo: 400 mW
|
Modulation system: | |
Max FM deviation (Factory set): | ±2 KHz |
Spurious emissions: | Better than -? dB |
Microphone impedance / connector: | 500 ohm / 5-pin (Metal locking ring connector) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 1981-198x (Discontinued) |
Main PCB: |
SAGA E2-29
Double sided, non plated-through holes
Through-hole components
|
Sub PCBs: |
? - Lever switches board
? - LED display board
|
Additional info: | New price, september 1982 in the UK: £99.00 |
Related documents: | User manual (920 KB) |
Sams Photofact #: | None |
Modifications and fixes: | |
Reviews: | CB Radio (UK): September 1982 |
Options / Accessories: |
|