RigPix logo

CB/Freeband logo

Back to main

Back to CB & "Freeband"

Next mobile

Copyright logo

Last modified 2022-01-28

Valid HTML 4.01 Transitional

Stabo XM3003E

A picture of Stabo XM3003E


Type:Citizen band transceiver, multinorm
Frequency range
depending on setting:
EC: 26.965-27.405 MHz
EU: 26.965-27.405 MHz
E: 26.965-27.405 MHz
D: 26.565-27.405 MHz
D2: 26.965-27.405 MHz
PL: 26.960-27.410 MHz
UK: 27.60125-27.99125 MHz
RU: 26.515-27.855 MHz (Modification required)
Channels / tuning steps:40, 80 or 120 (Depending on setting)
Mode:AM / FM
Frequency control:PLL
Frequency stability:?%
Clarifier or Delta tune:No
Power supply:13.2 VDC
Current drain / power consumption:RX: 500 mA (Nominal)
TX: Max 1.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):116*36*168 mm (4.57*1.42*6.61")
Weight:800 g (1.76 lb)
Other features:ANL. ASC. Channel 19 switch. RF gain.

Receiver system: Double conversion superheterodyne
1st IF: ? MHz
2nd IF: ? KHz
Sensitivity: AM: 0.7 uV (20 dB SINAD)
FM: 0.35 uV (20 dB SINAD)
Selectivity:10 KHz (-60 dB)
Image rejection:60 dB
AF output power / speaker:5 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm

RF output power: AM: 1 or 4 W (Depending on setting)
FM: 4 W
Modulation system:
Max FM deviation (Factory set):? KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 6-pin (Metal locking ring connector)
Microphone input level:10 mV (No reference)

Main PCB:
Sub PCBs:
Additional info:
Related documents:
Sams Photofact #:None
Modifications and fixes:
Options / Accessories:
- -