RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Sommerkamp logo


Copyright logo


Last modified 2022-01-27

Valid HTML 4.01 Transitional

Sommerkamp TS-788DXCC

A picture of Sommerkamp TS-788DXCC

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range:26-30 MHz
Channels / tuning steps:100 Hz, 1 / 10 / 100 KHz
Mode:AM / FM / SSB / CW
Frequency control:PLL
Frequency stability:?%
Clarifier or Delta tune:±? KHz
Power supply:11-16 VDC
Current drain / power consumption:RX: ? mA
TX: Max 20 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):156*61*290 mm (6.14*2.4*11.42")
Weight:? Kg (? lb)
Other features:NB. RIT. SWR-meter.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 10.7 MHz
Sensitivity:
Selectivity:
Image rejection:>50 dB
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:Hi: 100 W (25 W AM carrier)
Lo: 10 W (5 W AM carrier)
Modulation system:
FM deviation (Factory set):±1.5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohms / ?-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1982-198x (Discontinued)
Main PCB:
Sub PCBs:
Additional info: This was the fifth "Coffeewarmer", and version three in the TS-788DX series.
The microphone is switchable for use as a speaker-mike, which is very useful
in a noisy vehicle. This version also features -100 KHz offset for 10 m repeater use.
Related documents: RF final: MRF454
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -