RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Sommerkamp logo


Copyright logo


Last modified 2022-01-27

Valid HTML 4.01 Transitional

Sommerkamp TS-732P

A picture of Sommerkamp TS-732P

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:Standard: 26.965-27.275 MHz
Operates between 26.5-29.7 MHz (Depending on XTALs)
Channels / tuning steps:32
Mode:AM
Frequency control:Two XTALs per channel (Yeah, that's a lot of XTAL's)
Frequency stability:?%
Clarifier or Delta tune:No
Power supply:Mains: 110 / 220 VAC
or 11-16 VDC
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):156*58*205 mm (6.14*2.28*8.07")
Weight:2.3 Kg (5.07 lb)
Other features:ANL




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 455 KHz
Sensitivity:1 uV (10 dB S/N)
Selectivity:10 KHz (-25 dB)
Image rejection:
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:~6 W (10 W input)
Modulation system:Collector modulation
FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:500 ohm / 7-pin (DIN)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:197x-197x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:
Related documents:
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -