RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


SBE logo


Copyright logo


Last modified 2022-01-25

Valid HTML 4.01 Transitional

SBE Sidebander II (SBE-12CB)

A picture of SBE Sidebander II (SBE-12CB)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels / tuning steps:23
Mode:AM / SSB
Frequency control:XTAL-matrix
Frequency stability:?%
Clarifier or Delta tune:±? KHz
Power supply:11.7-15.9 VDC
Current drain / power consumption:RX: 0.3-1 A
TX (Early version): Max 2.2 A @ 8 W (PEP output)
TX (1973 version): Max 2.8 A @ 12 W (PEP output)
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):190*57*240 mm (7.5*2.25*9.5")
Weight:3 Kg (7 lb)
Other features:PA. NB.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB)
IF: 7.8 MHz
Double conversion superheterodyne (AM)
1st IF: 7.8 MHz
2nd IF: 455 KHz
Sensitivity: AM: 1 uV (10 dB S+N/N)
SSB: 0.5 uV (10 dB S+N/N)
Selectivity: AM: 3.5 KHz (-6 dB), 8 KHz (-60 dB)
SSB: 2.1 KHz (-6 dB), 5.5 KHz (-50 dB)
Image rejection:-50 dB
AF output power / speaker:3 W at 10% distortion / 8 ohm
External speaker connector:1/4", 4-8 ohm




TRANSMITTER SECTION
RF output power: AM: 5 W (Input)
SSB (Early version): 15 W (PEP input)
SSB (1973 version): 25 W (PEP input)
Modulation system:AM: High and low level, Class B
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-197x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:
Related documents: User manual, Pre 1973 (3.8 MB)
Service manual, 1973 (4.9 MB)
Schematic, (594 KB)
Sams Photofact #:CB-50 (December 1973)
Modifications and fixes:
Reviews:
Options / Accessories:
- -