RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


SBE logo


Copyright logo


Last modified 2021-06-14

Valid HTML 4.01 Transitional

SBE Land Command (LCBS-4)

A picture of SBE Land Command (LCBS-4)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels/tuning steps:40
Mode:AM / SSB
Frequency control:PLL (PLL02A)
Frequency stability:?%
Power supply:Mains: 117 VAC (2-pin connector)
or 13.8 VDC (3-pin connector)
Current drain/power consumption:RX: ? VA @ mains
TX: ? VA @ mains
Antenna impedance/connector:50 ohm / SO-239
Dimensions (W*H*D):265*125*300 mm (10.43*4.92*11.81")
Weight:7.6 Kg (16.72 lb)
Other features:PA. NB/NL. Dimmer. Channel 9 switch.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB)
1st IF: 10.695 MHz
Double conversion superheterodyne (AM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity: AM: 1 uV (10 dB S/N)
SSB: 0.25 uV (10 dB S/N)
Selectivity: AM: 6 KHz (-6 dB)
SSB: 2 KHz (-6 dB)
Image rejection:
AF output power/speaker:2.7 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:
Max FM deviation:No FM
Spurious emissions:Less than -60 dB
Microphone impedance/connector:700 ohm / 5-pin DIN (180)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 19xx-19xx (Discontinued)
Main PCB:PTBM085COX by Cybernet Electronics Corporation
Sub PCBs: PTLD034COX - LED display board
PTPW007COX - AVR/power supply board
PTRF005DOX - RF board
PTSW061COX - Channel selector board
PTZZ045COX - Relay board
Additional info:
Related documents: Service manual (8.3 MB)
PLL: PLL02A
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options/Accessories:
- -