RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


SBE logo


Copyright logo


Last modified 2022-04-11

Valid HTML 4.01 Transitional

SBE Console V (SBE-40CB)

A picture of SBE Console V (SBE-40CB)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM / SSB
Frequency control:PLL (Multiple discrete IC's)
Frequency stability:0.001% @ -30 to +50°C (-22 to +122°F)
Clarifier or Delta tune:±? KHz
Power supply:Mains: 117 VAC (Fixed power cord)
or 13.8 VDC (Screw terminals)
Current drain / power consumption:RX: 0.5-1 A
TX: Max 3.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):457*152*305 mm (18*6*12")
Weight:5.44 Kg (12 lb)
Other features: PA. NL/NB. Channel 9 switch. SWR-meter.
Scanning (Stops on 1st clear channel).




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB)
IF: 10.695 MHz
Double conversion superheterodyne (AM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity: AM: 0.5 uV (10 dB S/N)
SSB: 0.15 uV (10 dB S/N)
Selectivity:
Image rejection:50 dB
AF output power / speaker:2.5 W at 10% distortion / 8 ohm
External speaker connector:8 ohm




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:AM: High and low level Class B
SSB: Balanced
FM deviation (Factory set):No FM
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1977-197x (Discontinued)
Main PCB:Double sided with non plated-through holes.
Sub PCBs:
Additional info:
Related documents:RF final: 2SD180
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of SBE Console V (SBE-40CB)