RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Copyright logo


Last modified 2022-01-24

Valid HTML 4.01 Transitional

Satcom Scan40 F

A picture of Satcom Scan40 F

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:FM
Frequency control:PLL (LC7131)
Frequency stability:±0.002%
Clarifier or Delta tune:No
Power supply:11.5-14 VDC (2-pin connector)
Current drain / power consumption:RX: ? mA
TX: Max 1.8 A @ 13.2 VDC
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:NB. Scanning. External selcall option.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (20 dB S+N/N)
Selectivity:10 KHz (-60 dB)
Image rejection:60 dB
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:4 W
Modulation system:
Max FM deviation (Factory set):±? KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:500 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 198x-198x (Discontinued)
Main PCB:PBCM001S by Cybernet Electronics Corporation
Sub PCBs:
Additional info:New price 1987 in the UK: £165.00
Related documents:
Sams Photofact #:None
Modifications and fixes:
Reviews:Citizen's Band: February 1988
Options / Accessories:
- -
An inside picture of Satcom Scan40 F
A rear picture of Satcom Scan40 F