RigPix logo

CB/Freeband logo

Back to main

Back to CB & "Freeband"

Next base

Royce logo

Copyright logo

Last modified 2022-02-13

Valid HTML 4.01 Transitional

Royce 625 / 1-625

A picture of Royce 625 / 1-625


Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Frequency control:PLL
Frequency stability:?%
Clarifier or Delta tune:? KHz
Power supply:Mains: 117 VAC (Fixed power cord)
or 13.8 VDC (2-pin connector on pigtail)
Current drain / power consumption:RX: ? mA
TX: Less than 1.7 A @ 13.8 VDC
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:PA. ANL. Tone hi-cut. Dimmer. SWR meter.

Receiver system: Double conversion superheterodyne
1st IF: ? MHz
2nd IF: 455 KHz
Sensitivity:? uV (10 dB S+N/N)
Selectivity:? KHz (-6 dB)
? KHz (-60 dB)
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:3.5 mm, ? ohm

RF output power:4 W
Modulation system:
FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV

Manufactured:Japan, 1977-197x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:Modular design
Related documents:
Sams Photofact #:CB-191 (May 1978)
Modifications and fixes:
Options / Accessories:
- -
A rear picture of Royce 625 / 1-625