RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Robyn logo


Copyright logo


Last modified 2022-01-24

Valid HTML 4.01 Transitional

Robyn SX-402D

A picture of Robyn SX-402D

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM (Can receive SSB with the BFO)
Frequency control:PLL
Frequency stability:?%
Clarifier or Delta tune:±? KHz
Power supply:13.8 VDC (2-pin connector)
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:PA. ANL. Intercom. SWR meter. BFO.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: ? MHz
2nd IF: ? KHz
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:~3.5 W (5 W input)
Modulation system:
FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan (Designed in the USA), 1978-197x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:FCC data: 10R2R76
Related documents:
Sams Photofact #:CB-192 (May 1978)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A picture of Robyn SX-402D label