GENERAL |
Type: | Citizen band / "Freeband" / Export transceiver |
Frequency range: |
Export mode
24.265-29.655 MHz
10 m mode
28.765-29.205 MHz
|
Channels / tuning steps: | 480 (Hi 6 bands + Low 6 bands = 12 * 40) |
Mode: | AM / FM / SSB / CW |
Frequency control: | PLL |
Frequency stability: | 0.003% @ -30 to +50°C (-22 to +122°F) |
Clarifier or Delta tune: | Coarse (RX/TX): ±5 KHz Fine (RX): ±1.5 KHz |
Power supply: | Mains: 115 / 230 VAC (Fixed power cord) |
Current drain / power consumption: | RX: ? W TX: ? W |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 405*150*300 mm (15.95*5.9*11.81"), without rack mounting handles |
Weight: | ? Kg (? lb) |
Other features: | PA. ANL/NB. Talkback. Roger beep. Echo chamber. Dimmer. |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Double conversion superheterodyne
1st IF: ? MHz
2nd IF: 455 KHz
|
Sensitivity: |
AM/CW: 0.5 uV (10 dB S/N)
FM: 0.25 uV (20 dB S/N)
SSB: 0.3 uV (10 dB S/N)
|
Selectivity: | -60 dB (Adjacent channel) |
Image rejection: | |
AF output power / speaker: | ? W at ?% distortion / ? ohm |
External speaker connector: | 3.5 mm |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
| Max Pwr |
AM: | 25 W (Carrier / dead key) / >100 W (PEP) |
FM (RMS): | 50 W |
SSB (PEP): | >100 W |
CW: | 25 W |
|
Modulation system: | |
FM deviation (Factory set): | ±? KHz |
Spurious emissions: | Better than -60 dB |
Microphone impedance / connector: | ? ohm / 4-pin (Metal locking ring connector) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Malaysia, 2023-202x |
Main PCB: |
EPT990015Z by Ranger
SMD and through-hole components
|
Sub PCBs: | |
Additional info: |
Built-in 25 A switch mode power supply. This radio uses two "RT1" driver and two
RT5 final MOSFETs. Question is; are these just sanded down and rebranded IRF MOSFETs?
Tsk tsk Ranger for playing that game.
|
Related documents: | |
Sams Photofact #: | None |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
|