RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Copyright logo


Last modified 2024-07-20

Valid HTML 4.01 Transitional

Radiofon PR-3

A picture of Radiofon PR-3

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels / tuning steps:1
Mode:AM
Frequency control:Two XTALs per channel
Frequency stability:?%
Clarifier or Delta tune:No
Power supply:Mains: 220 VAC
or 6 / 12 VDC (Transistor converter)
Current drain/power consumption:RX: ? W
TX: 60 W @ mains
Antenna impedance/connector:30-1000 ohm / SO-239
Dimensions (W*H*D):210*145*210 mm (8.27*5.71*8.27")
Weight:4 Kg (8.82 lb)
Other features:




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 455 KHz
Sensitivity:0.5 uV (10 dB S/N)
Selectivity:7 KHz (-6 dB)
Image rejection:
AF output power / speaker:3 W at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:~3 W (5 W input)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Sweden, 1962-196x (Discontinued)
Main PCB:
Sub PCBs:
Additional info: Only a small production run of about 300 units was manufactured
in Lysekil, Sweden.

New price, march 1962 in Sweden: SEK 735:- (With microphone)
New price, september 1962 in Sweden: SEK 735:- (With microphone)
New price, october 1963 in Sweden: SEK 1050:- (With microphone)
Related documents:
Approval / Market:Telestyrelsen / Sweden
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -