| GENERAL |
| Type: | Citizen band transceiver |
| Frequency range: | 26.965-27.405 MHz |
| Channels / tuning steps: | 40 |
| Mode: | AM / SSB |
| Frequency control: | PLL (MB8719) |
| Frequency stability: | 0.001% @ -20 to +50°C (-4 to +122°F) |
| Clarifier or Delta tune: | ±? KHz |
| Power supply: | Mains: 117 or 240 VAC (Fixed power cord), dependng on market
or 13.8 VDC (3-pin connector) |
| Current drain / power consumption: | RX: 0.3-1 A @ 13.8 VDC
TX: Less than 3 A @ 13.8 VDC |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 343*127*305 mm (13.5*5*12") |
| Weight: | 6.03 Kg (13.3 lb) |
| Other features: | PA. ANL/NB. Channel 9 button. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne
IF: 7.8 MHz
|
| Sensitivity: |
AM: 0.5 uV (10 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
|
| Selectivity: | 4.2 KHz (-6 dB), 7.9 KHz (-60 dB) |
| Image rejection: | 60 dB |
| AF output power / speaker: | 3 W at 10% distortion / 8 ohm |
| External speaker connector: | 3.5 mm, 8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
AM: 4 W
SSB: 12 W (PEP)
|
| Modulation system: | AM: High and low level, class B amplitude modulation |
| FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 500 ohm / 5-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Philippines, 19xx-19xx (Discontinued) |
| Main PCB: | |
| Sub PCBs: | |
| Additional info: |
This appears to be the new model name for President/Uniden Washington.
It's otherwise said to be identical to the Washington version 2 and 3.
If anyone has the story behind the name change, please contact me so I
can post it here.
|
| Related documents: | User manual (4.6 MB) |
| Sams Photofact #: | None |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
