RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


President logo


Copyright logo


Last modified 2024-12-08

Valid HTML 4.01 Transitional

President McKinley DX (Mk1)

A picture of President McKinley DX (Mk1)

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range:26.965-27.855 MHz
Channels / tuning steps:80
Mode:AM / SSB
Frequency control:PLL (MB8719)
Frequency stability:0.001% @ -20 to +50°C (-4 to +122°F)
Clarifier or Delta tune:±1 KHz
Power supply:11.7-15.9 VDC (Male 3-pin jack)
Current drain / power consumption:RX: Max 600 mA
TX: Max 2.2 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):185*58*230 mm (7.28*2.28*9.07")
Weight:2.04 Kg (4.5 lb)
Other features:PA. NB/ANL.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 7.8 MHz
Sensitivity: AM: 0.5 uV (10 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
Squelch sensitivity:Less than 0.5 uV (Threshold)
Selectivity: 4.2 KHz (-6 dB)
7 KHz (-60 dB)
Image rejection:75 dB
AF output power / speaker:3 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm), 8 ohm




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:AM: High and low level class B
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 5-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Taiwan, 1980-198x (Discontinued)
Main PCB:PC385 by Uniden
Sub PCBs:
Additional info:
Related documents:PLL: MB8719
Market(s) / Approval(s): Export
Sams Photofact #:
Modifications and fixes:
Reviews:
Options/Accessories:
- -
A rear picture of President McKinley DX (Mk1)