| GENERAL | 
| Type: | Citizen band / "Freeband" / Export transceiver | 
| Frequency range: | 26-30 MHz Originally marketed as a 10 m ham transceiver, but expanding
 the frequency range is a simple task, and the standard 40 channel
 CB bandplan is already encoded in the CPU from factory.
 | 
| Channels / tuning steps: | 100 Hz, 1 / 10 KHz | 
| Mode: | AM / FM / SSB / CW | 
| Frequency control: | PLL | 
| Frequency stability: | Max ? ppm | 
| Clarifier or Delta tune: | ±1 KHz "RIT" | 
| Power supply: | 13.2 VDC (2-pin connector) | 
| Current drain / power consumption: | RX: Max 1 A TX: Max 4.5 A
 | 
| Antenna impedance / connector: | 50 ohm / SO-239 | 
| Dimensions (W*H*D): | 185*60*250 mm (7.28*2.36*9.84") | 
| Weight: | 2 Kg (4.41 lb) | 
| Other features: | PA. SWR-meter. NB. RIT. Dimmer. Local/DX button. Scanning. | 
| 
 | 
 | 
| 
 | 
 | 
| RECEIVER SECTION | 
| Receiver system: | Single conversion superheterodyne (AM/SSB/CW) IF: 10.695 MHz
 Double conversion superheterodyne (FM)
 1st IF: 10.695 MHz
 2nd IF: 455 KHz
 | 
| Sensitivity: | AM: 0.5 uV (10 dB S/N) FM: 0.5 uV (20 dB S/N)
 SSB/CW: 0.25 uV (10 dB S/N)
 | 
| Selectivity: | 70 dB (Adjacent channel) | 
| Image rejection: | 65 dB | 
| AF output power / speaker: | 2.5 W at 10% distortion / 8 ohm | 
| External speaker connector: | 9-pin Molex accessory jack, 8 ohm | 
| 
 | 
 | 
| 
 | 
 | 
| TRANSMITTER SECTION | 
| RF output power: | AM/FM/CW: 10 W SSB: 21 W (PEP)
 | 
| Modulation system: |  | 
| FM deviation (Factory set): | ±3 KHz (1 KHz @ 30 mV input) | 
| Spurious emissions: | Better than -? dB | 
| Microphone impedance / connector: | ? ohm / 5-pin (Metal locking ring connector) | 
| Microphone input level: | 1 mV (No reference) | 
| 
 | 
 | 
| 
 | 
 | 
| MISCELLANEOUS | 
| Manufactured: | Philippines (Early), 198x-199x (Discontinued) China (Later), 199x-2004 (Discontinued)
 | 
| Main PCB: | Early: PB-111AA, AB, AC, AD and AE by Uniden Later: PB-333AA by Uniden
 | 
| Sub PCBs: | Early: Currently unknown to me
 Later:
 PB-112AE - LCD display and driver board
 PB-117AD - NB board
 PB-121AD - PLL and CPU board
 PB-293AA - RF final board
 PB-298AA - Shorting bar board
 PB-299AA - SWR board
 PB-303AA - FM demodulator board
 PB-312AA - Volume and squelch pots board
 ? - Mode selector board
 ? - RIT & RF power pots board
 ? - Channel selector board
 ? - Pushbutton board
 ? - Mic jack board
 | 
| Additional info: | The Lincoln was intended for the european market and is similar to the Uniden branded HR-2830 for the US market.
 
 | 
| Related documents: | User manual (449 KB) PLL #1: SM5152A
 PLL #2: PLL0305A
 FM-IF: IR3N06
 | 
| Sams Photofact #: | None | 
| Modifications and fixes: | Frequency expansion (125 KB) 
 There was also the "Chipswitch", which added many enhanced features such as: Even further
 extended frequency range, 30 memory channels, repeater offset, split operation and more. This
 modification consisted of a CPU replacement. In 2008, the chip was available for around $50.
 | 
| Reviews: |  | 
| Options / accessories: |  |