| GENERAL |
| Type: | Citizen band transceiver |
| Frequency range: |
USA
CB: 26.965-27.405 MHz
WX: 162.400-162.550 MHz (RX only)
|
| Channels / tuning steps: | 40 |
| Mode: | AM / FM / SSB |
| Frequency control: | PLL/CPU |
| Frequency stability: | Max ? ppm |
| Clarifier or Delta tune: | ±? KHz |
| Power supply: | 13.2 VDC (Male 3-pin jack) |
| Current drain / power consumption: | RX: 200-600 mA
TX: Max 5 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 185*56*172 mm (7.3*2.2*6.8") |
| Weight: | 1.19 Kg (2.62 lb) |
| Other features: |
PA. ANL/NB. Noise reduction (NRC). VOX. SWR-meter. Channel 9/19 button (EMG).
Multi color backlite. Dual watch. 4 memories with scanning. Dimmer. Voltmeter.
USB charging jack (5 V, max 2.1 A). NOAA weather channels with weather alert.
ASC. Six selectable roger beeps. CTCSS/PL and DCS.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: ? MHz
2nd IF: 455 KHz - Ceramic filter: LT455HT
|
| Sensitivity: |
AM: 0.5 uV (20 dB SINAD)
FM: 0.35 uV (20 dB SINAD)
SSB: 0.28 uV (20 dB SINAD)
|
| Selectivity: | 10 KHz (-60 dB) |
| Image rejection: | 60 dB |
| AF output power / speaker: | 3 W at ?% distortion / 8 ohm |
| External speaker connector: | 3.5 mm, 8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
AM: 4 W
FM: 4 W
SSB: 12 W (PEP)
|
| Modulation system: | |
| Max FM deviation (Factory set): | ±? KHz |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: |
? ohm / 6-pin (Male locking ring connector)
Electret or dynamic selectable
|
| Microphone input level: | 3 mV (No reference) |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | China, 2023-202x |
| Main PCB: |
PP811ZA by Qixiang Electron Co.Ltd.
Mainly SMD components
|
| Sub PCBs: |
PP811KA - Front panel board
|
| Additional info: | |
| Related documents: | User manual (5 MB, EN/FR/ES) |
| Sams Photofact #: | None |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
