RigPix logo

CB/Freeband logo

Back to main

Back to CB & "Freeband"

Next mobile

Pearce-Simpson logo

Copyright logo

Last modified 2021-05-14

Valid HTML 4.01 Transitional

Pearce-Simpson Super Panther DX (By Gladding Corporation)

A picture of Pearce-Simpson Super Panther DX (By Gladding Corporation)


Type:Citizen band transceiver
Frequency range: 26.965-28.105 MHz in two bands
Lo: 26.965-27.405 MHz
Hi: 27.665-28.105 MHz
Channels/tuning steps:80 (2*40)
Mode:AM / SSB / (CW)
Frequency control:PLL (PLL02A)
Frequency stability:?%
Power supply:13.8 VDC (2-pin connector)
Current drain/power consumption:RX: ? mA
TX: ? A
Antenna impedance/connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:NB. Local/DX switch. TX fine tune. CW jack.

Receiver system: Double conversion superheterodyne (SSB)
1st IF: 10.695 MHz
Double conversion superheterodyne (AM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity: AM: 1.5 uV (10 dB S/N)
SSB: 0.7 uV (10 dB S/N)
Selectivity: AM: 6 KHz (-6 dB)
SSB: 2.1 KHz (-6 dB)
Image rejection:
AF output power/speaker:3 W at 10% distortion / ? ohm
External speaker connector:3.5 mm

RF output power: AM: 5 W
SSB: 12 W (PEP)
Modulation system: AM: High level class B
SSB: Double balanced modulator with crystal lattice filter
Max FM deviation:No FM
Spurious emissions:Less than -? dB
Microphone impedance/connector:500 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV

Manufactured:Japan, 197x-197x (Discontinued)
Main PCB:PTBM048AOX by Cybernet Electronics Corporation
Sub PCBs: PTLD010COX - LED display board
PTOS004COX - Crystal board
PTSW020COX - Channel selector board
Additional info:
Related documents: User manual (2.1 MB)
AF amplifier: TA7205P
RF driver: 2SC2166
RF final: 2SC1969
Sams Photofact #:None
Modifications and fixes:
- -