RigPix logo

CB/Freeband logo

Back to main

Back to CB & "Freeband"

Next mobile

Pearce-Simpson logo

Copyright logo

Last modified 2022-01-19

Valid HTML 4.01 Transitional

Pearce-Simpson Super Cheetah (By Hatadi Electronics)

A picture of Pearce-Simpson Super Cheetah (By Hatadi Electronics)


Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM / SSB
Frequency control:PLL (uPD2824C)
Frequency stability:?%
Clarifier or Delta tune:1.25 KHz
Power supply:13.8 VDC (3-pin connector)
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):184*57*235 mm (7.25*2.25*9.25")
Weight:1.81 Kg (4 lb)
Other features:PA. ANL/NB. Dimmer.

Receiver system: ? conversion superheterodyne
Sensitivity: AM: 0.5 uV (10 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
Selectivity:6 KHz (-6 dB)
10 KHz (-60 dB)
Image rejection:60 dB
AF output power / speaker:3 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm

RF output power:AM: 4 W
SSB: 12 W (PEP)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV

Manufactured:Taiwan, 198x-198x (Discontinued)
Main PCB:PC-965 by Uniden
Sub PCBs: PB-025 - Channel selector board
PC-834 - Shorting bar board
PC-897 - LED display board
Additional info:
Related documents: User manual (752 KB)
Schematic diagram (205 KB)
PLL: uPD2824C
RF driver: 2SC2166
RF final: 2SC2312
Sams Photofact #:None
Modifications and fixes:
Options / Accessories:
- -
A rear picture of Pearce-Simpson Super Cheetah (By Hatadi Electronics)