RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Midland logo


Copyright logo


Last modified 2023-11-17

Valid HTML 4.01 Transitional

Midland 13-882C

A picture of Midland 13-882C

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels / tuning steps:23
Mode:AM
Frequency control:PLL (PLL02A)
Frequency stability:Max ? ppm
Clarifier or Delta tune:±? KHz
Power supply:13.8 VDC (3-pin connector)
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):162*57*200 mm (6.38*2.25*7.88")
Weight:1.72 Kg (3.8 lb)
Other features:PA. ANL/NB. AWI.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:0.7 uV (10 dB S/N)
Selectivity:±10 KHz (-45 dB)
Image rejection:
AF output power / speaker:3 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8-16 ohm




TRANSMITTER SECTION
RF output power:4 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1976-197x (Discontinued)
Main PCB:PTBM039AOX by Cybernet Electronics Corporation
Sub PCBs:EPO-0616
Additional info:
Related documents: User manual (2.4 MB)
Schematic diagram (1.4 MB)
PLL: PLL02A
Sams Photofact #:CB-119 (May 1977)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Midland 13-882C