| GENERAL |
| Type: | Citizen band transceiver |
| Frequency range: | 26.965-27.255 MHz |
| Channels / tuning steps: | 23 |
| Mode: | AM |
| Frequency control: | XTAL matrix (14 XTALs) |
| Frequency stability: | 0.005% @ -30 to +50°C (-22 to +122°F) |
| Clarifier or Delta tune: | ±? KHz |
| Power supply: | 11-15 VDC (Fixed power cord) |
| Current drain / power consumption: | RX: 200 mA (Squelched)
TX: Max 1.5 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 165*55*200 mm (6.5*2.16*7.87") |
| Weight: | 1.5 Kg (3.31 lb) |
| Other features: | PA. ANL. Delta tune. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 10.615 MHz
2nd IF: 455 KHz - Ceramic filter: Murata CFU455H
|
| Sensitivity: | 0.5 uV (10 dB S/N) |
| Selectivity: | 5.5 KHz (-6 dB) |
| Image rejection: | |
| AF output power / speaker: | 1 W at ?% distortion / 8 ohm |
| External speaker connector: | 3.5 mm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: | ~3.5 W (5 W input) |
| Modulation system: | |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -50 dB |
| Microphone impedance / connector: | 600 ohm / 4-pin (Metal locking ring connnector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 197x-197x (Discontinued) |
| Main PCB: | Unmarked |
| Sub PCBs: |
Unmarked - Channel selector board
Unmarked - Volume, squelch and switches board
|
| Additional info: | Also sold as Omnicom RS-5100 |
| Related documents: | |
| Sams Photofact #: | None |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
