| GENERAL |
| Type: | Citizen band / "Freeband" / Export transceiver |
| Frequency range: |
26.965-27.855 MHz in two bands
| Lo: | 26.965-27.405 MHz |
| Hi: | 27.415-27.855 MHz |
|
| Channels / tuning steps: | 80 (2*40) |
| Mode: | AM / FM / SSB |
| Frequency control: | PLL (PLL02A) |
| Frequency stability: | ±0.005% |
| Clarifier or Delta tune: | ±? Hz |
| Power supply: | 13.8 VDC (2-pin connector) |
| Current drain / power consumption: | RX: 0.35-1.5 A
TX: Max 2.4 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | ? mm (?") |
| Weight: | ? Kg (? lb) |
| Other features: | PA. ANL/NB. Local/DX switch. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne (SSB)
IF: 10.695 MHz
Double conversion superheterodyne (AM/FM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
|
| Sensitivity: |
AM: 1 uV (10 dB S/N)
FM: 0.5 uV (20 dB S/N)
SSB: 0.5 uV (10 dB S/N)
|
| Selectivity: |
AM/FM: 6 KHz (-6 dB)
SSB: 2 KHz (-6 dB)
|
| Image rejection: | |
| AF output power / speaker: | 3 W at 10% distortion / 8 ohm |
| External speaker connector: | 3.5 mm, 8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
AM/FM: 10 W
SSB: 20 W (PEP)
|
| Modulation system: |
SSB: Double balanced modulator with crystal lattice filter
|
| Max FM deviation (Factory set): | ±1.5 KHz |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | ? ohm / 4-pin (Metal locking ring connector) |
| Microphone input level: | 20 mV @ 1.25 KHz for ±1.5 KHz deviation |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 19xx-19xx (Discontinued) |
| Main PCB: | PTBM059COX by Cybernet Electronics Corporation |
| Sub PCBs: |
PTLD043AOX - LED channel display board
PTOS006AOX - VCO/PLL/crystal and FM-IF board
PTSW076AOX - Channel selector board
|
| Additional info: | |
| Related documents: |
User manual (8.2 MB)
Schematic diagram (5.6 MB) M-588 specific
PLL: PLL02A
|
| Sams Photofact #: | None |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
