| GENERAL |
| Type: | Citizen band / "Freeband" / Export transceiver |
Frequency range
depending on setting: |
26.965-27.405 MHz (CB)
25.615-30.105 MHz (Export)
24.890-24.990 / 28.000-29.700 MHz (10 & 12 m)
|
| Channels / tuning steps: | 40 or 240 channels, or 5 / 10 / 100 Hz, 1 / 10 / 100 KHz, 1 MHz steps |
| Mode: | AM / FM / SSB / CW |
| Frequency control: | PLL |
| Frequency stability: | 0.001% (TCXO) |
| Clarifier or Delta tune: | ±? KHz |
| Power supply: | 12-14 VDC (3-pin connector) |
| Current drain / power consumption: | RX: ? mA
TX: Max 9 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 197*57*273 mm (7.75*2.25*10.75") |
| Weight: | 2 Kg (4.4 lb) |
| Other features: |
Roger beep. NB. +10 KHz button. Backlit faceplate.
Echo chamber. Talkback. SWR meter. ASQ.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
|
| Sensitivity: |
AM: 1 uV (10 dB S+N/N)
FM: 0.3 uV (12 dB SINAD)
SSB: 0.25 uV (10 dB S+N/N)
|
| Selectivity: |
AM/FM: 6 KHz (-6 dB), 9 KHz (-60 dB)
SSB: 3.3 KHz (-6 dB), 6 KHz (-60 dB)
|
| Image rejection: | |
| AF output power / speaker: | 3 W at 10% distortion / 8 ohm |
| External speaker connector: | 3.5 mm, 8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
AM: 10 W (Average), Max 50 W (PEP)
FM/CW: Max 20 W
SSB: Max 50 W (PEP)
|
| Modulation system: | |
| FM deviation (Factory set): | ±2 KHz |
| Spurious emissions: | Better than -50 dB |
| Microphone impedance / connector: | 2.2 Kohm / 6-pin |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | 2015-2019 (Discontinued) |
| Main PCB: | |
| Sub PCBs: | |
| Additional info: | New price 2019 in the US: $349.99 |
| Related documents: |
Two ERF2030 finals
|
| Sams Photofact #: | None |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
