RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Lafayette logo


Copyright logo


Last modified 2024-01-27

Valid HTML 4.01 Transitional

Lafayette Petrusse

A picture of Lafayette Petrusse

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range: 26.065-28.305 MHz in five bands
A:   26.065-26.505 MHz
B:   26.515-26.955 MHz
C:   26.965-27.405 MHz
D:   27.415-27.855 MHz
E:   27.865-28.305 MHz
Channels / tuning steps:200 (5*40)
Mode:AM / FM / SSB / CW
Frequency control:PLL (MC145106P)
Frequency stability:0.003% @ -30 to +50°C (-22 to +122°F)
Clarifier or Delta tune:RX/TX: ±5 KHz "VFO"
RX: ±1 KHz "Fine tune"
Power supply:Mains: 220 VAC (Fixed power cord)
or 13.8 VDC (3-pin connector)
Current drain / power consumption:RX: ? W @ 220 VAC - ? mA @ 13.8 VDC
TX: Max 75 W @ 220 VAC - Max ? A @ 13.8 VDC
Antenna impedance / connector:50 ohm / Two SO-239 (Selectable)
Dimensions (W*H*D):405*150*300 mm (15.95*5.9*11.81"), without rack mounting handles
Weight:8.5 Kg (18.74 lb)
Other features: PA. ANL/NB. Echo. Roger beep. Selcall jack. SWR meter.
Frequency counter and recording jacks.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB/CW)
IF: 10.695 MHz
Double conversion superheterodyne (AM/FM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity: AM: 1 uV (10 dB S/N)
FM: 1 uV (20 dB S/N)
SSB/CW: 0.2 uV (10 dB S/N)
Selectivity: AM/FM
4 KHz (-5 dB)
10 KHz (-50 dB)
SSB/CW
2 KHz (-5 dB)
Image rejection:50 dB
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighMidLow
AM:5 W? W500 mW
FM:5 W? W500 mW
SSB (PEP):12 W? W3 W
CW:5 W? W500 mW
Modulation system: AM: Class B collector modulation
SSB: Dual-balanced modulation
Max FM deviation (Factory set):±1.5 KHz @ 1250 Hz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 4-pin (Metal locking ring connector)
Microphone input level:20 mV @ 1.25 KHz




MISCELLANEOUS
Manufactured:Taiwan, 19xx-19xx (Discontinued)
Main PCB:EPT360010Z by Ranger
Sub PCBs: EPT360040Z   - SWR board
EPTOSSB30Z - Channel selector board
EPTOSSB40Z - LED channel display and indicator board
EPTOSSB50Z - Echo board
EPTOSSB60Z - PSU board
EPTOSSB70Z - Antenna selector board
EPTOSSB80Z - Function selector board
Additional info:
Related documents: User / service manual (2.1 MB)
PLL: MC145106
AF amp: TA7222AP
RF driver: 2SC2166C
RF final: 2SC2312C
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -