RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Kraco logo


Copyright logo


Last modified 2024-09-25

Valid HTML 4.01 Transitional

Kraco 512 (A)

A picture of Kraco 512 (A)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels / tuning steps:3
Mode:AM
Frequency control:Two XTAL's per channel
Frequency stability:0.002% @ 25°C (77°F)
Clarifier or Delta tune:No
Power supply:13.8 VDC (Male 2-pin jack)
Current drain / power consumption:RX: ? mA
TX: Max 1.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):166*61*198 mm (6.54*2.4*7.8")
Weight:? Kg (? lb)
Other features:ANL. 2-tone selcall with 12 V output jack.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 455 KHz
Sensitivity:0.7 uV (10 dB S/N)
Squelch sensitivity:0.5 uV (Treshold)
1 mV (Tight)
Selectivity:6 KHz (-6 dB)
20 KHz (-50 dB)
Image rejection:
AF output power / speaker:3 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm), 8 ohm




TRANSMITTER SECTION
RF output power:Max 3.5 W (5 W input)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-197x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:
Related documents: AF amplifier: Two 2SC1096
RF driver: 2SC2086
RF final: 2SC1969
Approval / Market:
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -