RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Copyright logo


Last modified 2022-01-12

Valid HTML 4.01 Transitional

Karinna KSB-18

A picture of Karinna KSB-18

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:27.015-27.225 MHz
Channels / tuning steps:18 (Old australian bandplan)
Mode:AM / SSB
Frequency control:PLL (PLL02A)
Frequency stability:±?%
Clarifier or Delta tune:±? Hz
Power supply:13.8 VDC
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):184*62*245 mm (7.24*2.44*9.65")
Weight:? Kg (? lb)
Other features:PA. ANL/NB. Local/DX switch.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB)
IF: 10.695 MHz
Double conversion superheterodyne (AM/FM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1977-197x (Discontinued)
Main PCB:PTBM048AOX by Cybernet Electronics Corporation
Sub PCBs:
Additional info:
Related documents:PLL: PLL02A
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -