RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Copyright logo


Last modified 2022-01-12

Valid HTML 4.01 Transitional

Intek Multicom-485

A picture of Intek Multicom-485

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range:26.965-27.405 MHz (Standard)
25.165-29.655 MHz (Export)
Channels / tuning steps:40 (Standard)
400 (Export)
Mode:AM / FM / SSB
Frequency control:PLL
Frequency stability:? ppm
Clarifier or Delta tune:Coarse: ±? KHz
Fine: ±? Hz
Power supply:13.8 VDC
Current drain / power consumption:RX: ? mA
TX: Max 3 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):154*52*187 mm (6.06*2.05*7.36")
Weight:1.2 Kg (2.65 lb)
Other features:Scanning. NB. Dual watch.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: ? MHz
2nd IF: 455 KHz
Sensitivity: AM: 0.5 uV (10 dB S/N)
FM: 0.5 uV (12 dB SINAD)
SSB: 0.25 uV (10 dB S/N)
Selectivity:
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:TS jack (3.5 mm)




TRANSMITTER SECTION
RF output power: AM/FM/SSB: 4 W (Standard)
AM/FM: 6 W (Export)
SSB: 12 W (Export)
Modulation system:
FM deviation (Factory set):±? KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / ?-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:200x-200x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:
Related documents:
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -