RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next HT/portable


Handic logo


Copyright logo


Last modified 2026-08-07

Valid HTML 4.01 Transitional

Handic 31

A picture of Handic 31

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range: Standard
26.965-27.255 MHz

Can be aligned to any 300 KHz segment between 27-31 MHz
Channels/tuning steps:3
Mode:AM
Frequency control:Two XTALs per channel
Frequency stability:±?%
Clarifier or Delta tune:No
Power supply:9.6-12 VDC (Eight R6 / AA alkaline or NiCd batteries)
Current drain/power consumption:RX: 16 mA (Squelched)
TX: 130 mA (No modulation)
Antenna impedance/connector:- / Fixed telescopic whip
Dimensions (W*H*D):75*220*60 mm (2.95*8.66*2.36")
Weight:530 g (1.17 lb), without batteries
Other features:




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 455 KHz
Sensitivity:0.7 uV (10 dB S/N)
Squelch sensitivity:
Selectivity:20 KHz (-45 dB)
Image rejection:
AF output power/speaker:300 mW at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:~500 mW (1 W input)
Modulation system:
Max AM modulation (Factory set):?%
Max FM deviation (Factory set):No FM
Spurious emissions:Less than -? dB
Microphone impedance/connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:1976-198x (Discontinued)
Main PCB:
Sub PCBs:
Additional info: This model was available in West Germany in 1976, but
didn't arrive to the swedish market until 1979 or 1980.
Related documents:
Known markets and approvals: Sweden
Televerket: ?
West Germany
FTZ Nr. PR27-272 P/76
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options/Accessories:
- -