RigPix logo

CB/Freeband logo

Back to main

Back to CB & "Freeband"

Next HT/portable

Ham International logo

Copyright logo

Last modified 2022-04-29

Valid HTML 4.01 Transitional

Ham International Handmaster 40

A picture of Ham International Handmaster 40


Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Frequency control:PLL (PLL02A)
Frequency stability:?%
Clarifier or Delta tune:No
Power supply:12-15 VDC (Ten alkaline or twelve NiCd R6/AA batteries)
or 12-15 VDC external
Current drain / power consumption:RX: 200-500 mA
TX: Max 1.1 A
Antenna impedance / connector:50 ohm / 3.5 mm or built-in telescopic whip
Dimensions (W*H*D):? mm (?")
Weight:1.6 Kg (3.53 lb), with batteries
Other features:PA.

Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (10 dB S/N)
Image rejection:
AF output power / speaker:? mW at ?% distortion / 100 ohm
External speaker connector:3.5 mm

RF output power:4 W
Modulation system:
FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / Internal or 4-pin (Metal locking ring connector)
Microphone input level:? mV

Manufactured:Japan, 197x-197x (Discontinued)
Main PCB:PTBH023AOX by Cybernet Electronics Corporation
Sub PCBs: PTSW059AOF - Channel selector & LED display board
PTZZ038AOY - DC jacks board
PTZZ039AOY - Mike jack and switch board
Additional info:
Related documents: PLL: PLL02A
Sams Photofact #:None
Modifications and fixes:
Options / Accessories:
- -
An inside picture of Ham International Handmaster 40