| GENERAL |
| Type: | Citizen band transceiver |
| Frequency range: | 27.015-27.225 MHz |
| Channels / tuning steps: | 18 (Old australian bandplan) |
| Mode: | AM / SSB |
| Frequency control: | PLL (PLL02A) |
| Frequency stability: | ±?% |
| Clarifier or Delta tune: | ±? Hz |
| Power supply: | 12-14 VDC |
| Current drain / power consumption: | RX: ? mA
TX: Max 2.5 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 190*65*215 mm (7.48*2.56*8.46") |
| Weight: | ? Kg (? lb) |
| Other features: | PA. NB/ANL. AWI. Tone hi-cut. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne (SSB)
1st IF: 10.695 MHz
Double conversion superheterodyne (AM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
|
| Sensitivity: | Better than 0.5 uV (For 500 mW audio output) |
| Selectivity: | 50 dB @ ±10 KHz (Adjacent channel) |
| Image rejection: | |
| AF output power / speaker: | ? W at ?% distortion / 8 ohm |
| External speaker connector: | TS jack (3.5 mm), 8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
AM: 4 W
SSB: 12 W (PEP)
|
| Modulation system: | |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 500 ohm / 4-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 19xx-19xx (Discontinued) |
| Main PCB: | PTBM071COX by Cybernet Electronics Corporation |
| Sub PCBs: |
PTLD023COX - LED display board
PTRF003DOX - RF board
PTSW039COX - Channel selector board
|
| Additional info: | |
| Related documents: |
User manual (8.4 MB)
PLL: PLL02A
RF driver: 2SC2166
RF final: 2SC1969
|
| Sams Photofact #: | |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
