RigPix logo

CB/Freeband logo

Back to main

Back to CB & "Freeband"

Next mobile

Danita logo

Copyright logo

Last modified 2022-02-03

Valid HTML 4.01 Transitional

Danita 340 (Old version)

A picture of Danita 340 (Old version)


Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Frequency control:PLL (LC7132)
Frequency stability:Max ? ppm
Clarifier or Delta tune:No
Power supply:12-14 VDC (2-pin connector)
Current drain / power consumption:RX: 150-500 mA
TX: Less than 1.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):120*42*165 mm (4.72*1.65*6.5")
Weight:550 g (1.21 lb), without mike and and mounting bracket
Other features: Dimmer. Power/Modulation/S-meter
External S-meter output jack.

Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:0.45 uV (10 dB S/N)
Selectivity:20 KHz (-60 dB)
Image rejection:
AF output power / speaker:2 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm

RF output power:4 W
Modulation system:
FM deviation (Factory set):1.5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:500 ohm / 5-pin (180 DIN)
Microphone input level:? mV

Manufactured:Korea (Designed in Denmark), 198x-198x (Discontinued)
Main PCB:401080-C by Maxon
Sub PCBs:
Additional info:New price 1990 in Sweden: SEK 790:-
Related documents: User manual (1.1 MB, in English & Danish)
FM-IF: MC3357
PLL: LC7132
RF driver: 2SC2314
RF final: 2SC2078
Sams Photofact #:None
Modifications and fixes:
Options / Accessories:
- -
A rear picture of Danita 340 (Old version)