RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Danita logo


Copyright logo


Last modified 2024-07-16

Valid HTML 4.01 Transitional

Danita 1240

A picture of Danita 1240

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:FM
Frequency control:PLL
Frequency stability:±?%
Clarifier or Delta tune:No
Power supply:13.8 VDC (Fixed power cord)
Current drain / power consumption:RX: 200 mA
TX: Max 1.3 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):135*35*170 mm (5.32*1.38*6.69")
Weight:950 g (2.09 lb)
Other features:PA. Channel 9/19 switch.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz - Ceramic filter: LT455HTW
Sensitivity:0.5 uV (10 dB SINAD)
Selectivity:
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:4 W
Modulation system:
Max FM deviation (Factory set):±? KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:China (Designed in Denmark) 199x-200x (Discontinued)
Main PCB: 090-612213-00 (130994) by ?
Single sided with through-hole components
Sub PCBs:
Additional info:
Related documents: PLL/Controller: LC7185
AF amplifier: TDA2003
FM-IF: SL5018
Approval / Market:CEPT / Europe
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -