RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Copyright logo


Last modified 2020-11-07

Valid HTML 4.01 Transitional

Craig L201

A picture of Craig L201

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM
Frequency control:PLL (TC9106)
Frequency stability:±130 Hz @ -30 to +50°C (-22 to +122°F)
Clarifier or Delta tune:±1.25 KHz
Power supply:Mains: 120 VAC (Fixed power cord)
or 13.8 VDC (3-pin connector)
Current drain / power consumption:RX: 700-950 mA @ 13.8 VDC
TX: Less than 1.6 A @ 13.8 VDC
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:PA. ANL/NB. Channel 9 switch. Tone control. SWR meter.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 10.695 MHz
Sensitivity:0.5 uV (10 dB S+N/N)
Selectivity:6 KHz (-6 dB)
Image rejection:70 dB
AF output power / speaker:3 W at 10% distortion / ? ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:4 W
Modulation system:
FM deviation (Factory set):No FM
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Taiwan, 19xx-19xx (Discontinued)
Main PCB:PC-566AA by Uniden
Sub PCBs: PC-311AA - Headphone jack board
PC-398AA - External speaker jack board
PC-410AC - PSU board
PC-433AA - LED channel display
PC-434BA - Clock AVR board
PC-435AA - Channel selector board
PC-443AA - Clock pushbuttons board
PC-455AA - Slide switch assembly board
PC-541AA - LED clock logic board
PC-544AA - Mic jack board
PC-546AA - LED indicators board
Additional info:
Related documents:
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -