RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Copyright logo


Last modified 2022-06-12

Valid HTML 4.01 Transitional

Colt 890

A picture of Colt 890

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range: 26.515-27.855 MHz in three bands
Lo:   26.515-26.955 MHz
Mid:   26.965-27.405 MHz
Hi:   27.415-27.855 MHz
Channels / tuning steps:120 (3*40)
Mode:AM / FM / SSB
Frequency control:PLL (PLL02A)
Frequency stability:±?%
Clarifier or Delta tune:±? Hz "Tune"
Power supply:13.8 VDC (2-pin connector)
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):190*64*265 mm (7.48*2.52*10.43")
Weight:2.33 Kg (5.14 lb), without mounting bracket
Other features:PA. NB. Tone hi-cut.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB)
IF: 10.695 MHz
Double conversion superheterodyne (AM/FM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:3 W at ?% distortion / ? ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power: AM: 5 W
FM: 5 W
SSB: 12 W (PEP)
Modulation system:
Max FM deviation (Factory set):±? KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 198x-198x (Discontinued)
Main PCB:PTBM048AOX by Cybernet Electronics Corporation
Sub PCBs:
Additional info:This is possibly an expanded and relabeled Marko CB-88
Related documents:PLL: PLL02A
Sams Photofact #:
Modifications and fixes:
Reviews:
Options / Accessories:
- -