RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Cobra logo


Copyright logo


Last modified 2024-10-29

Valid HTML 4.01 Transitional

Cobra 85 (By Dynascan)

A picture of Cobra 85 (By Dynascan)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels / tuning steps:23
Mode:AM
Frequency control:XTAL-matrix (10 XTALs)
Frequency stability:0.005% @ -30 to +50°C (-22 to +122°F)
Clarifier or Delta tune:No
Power supply:Mains: 117 VAC
or 13.8 VDC
5-pin connector
Current drain / power consumption:RX: 0.4-1.3 A @ 13.8 VDC
TX: Max 1.8 A @ 13.8 VDC
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):190*135*210 mm (7.5*5.31*8.25")
Weight:3.4 Kg (7.5 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 7.8 MHz
2nd IF: 455 KHz - Ceramic filter: CFU455HA
Sensitivity:<1 uV (10 dB S+N/N)
Squelch sensitivity:Less than 1 uV (Treshold)
Selectivity:4 KHz (-6 dB)
20 KHz (-50 dB)
Image rejection:40 dB
AF output power / speaker:1 W at 10% distortion / 8 ohm
External speaker connector:Phono (RCA)




TRANSMITTER SECTION
RF output power:~3.5 W (5 W input)
Modulation system:High and low level class B
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:500 ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-197x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:
Related documents: User manual (3.7 MB)
Market / Approval: USA
FCC Type No: 85
Sams Photofact #:CB-77 (December 1975)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Cobra 85 (By Dynascan)