RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Cobra logo


Copyright logo


Last modified 2024-11-04

Valid HTML 4.01 Transitional

Cobra 66 GTL (By Dynascan)

A picture of Cobra 66 GTL (By Dynascan)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM
Frequency control:PLL (uPD2814C)
Frequency stability:±?%
Clarifier or Delta tune:No
Power supply:13.8 VDC (Male 3-pin jack)
Current drain / power consumption:RX: 275-900 mA
TX: Max 1.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):140*41*201 mm (5.5*1.62*7.93")
Weight:1.59 Kg (3.5 lb)
Other features:ANL. Channel 9 switch. Remote control speaker-microphone.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:0.5 uV (10 dB S+N/N)
Squelch sensitivity:
Selectivity:60 dB (Adjacent channel)
Image rejection:70 dB
AF output power / speaker:4 W at ?% distortion / ? ohm
External speaker connector:TS "Minijack" (3.5 mm)




TRANSMITTER SECTION
RF output power:4 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 20-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Taiwan, 1979-198x (Discontinued)
Main PCB:PC-590 by Uniden
Sub PCBs: PC-591 - Mike jack board
Additional info:
Related documents: Schematic diagram (238 KB)
AF amplifier: MB3712
RF driver: 2SC2028
RF final: 2SC2029
Market / Approval: USA
FCC Data: 230
Sams Photofact #:CB-287 (April 1980)
Modifications and fixes:
Reviews:
Options / Accessories:
CA-66
CK-6306
CK-6318
Monitor accessory
Extension cable. 1.83 m (6 ft)
Extension cable. 5.5 m (18 ft)