RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Cobra logo


Copyright logo


Last modified 2024-11-02

Valid HTML 4.01 Transitional

Cobra 21 XLR (By Dynascan)

A picture of Cobra 21 XLR (By Dynascan)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM
Frequency control:PLL (uPD858C)
Frequency stability:0.005% @ -30 to +50°C (-22 to +122°F)
Clarifier or Delta tune:No
Power supply:13.8 VDC (Male 3-pin jack)
Current drain / power consumption:RX: 0.5-1.5 A
TX: Max 2 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):159*54*238 mm (6.25*2.12*9.38")
Weight:1.76 Kg (3.88 lb)
Other features:PA. ANL. Dimmer.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (10 dB S+N/N)
Squelch sensitivity:Less than 1 uV (Treshold)
Selectivity:7 KHz (-6 dB)
10 KHz (-60 dB)
Image rejection:80 dB
AF output power / speaker:4 W at 7% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm), 8 ohm




TRANSMITTER SECTION
RF output power:4 W
Modulation system:High and low level class B
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:500 ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Taiwan, 1977-197x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:
Related documents:User manual (2.3 MB)
Market / Approval: USA
FCC Data: 21XLR
Sams Photofact #:CB-121 (May 1977)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Cobra 21 XLR (By Dynascan)