RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Cobra logo


Copyright logo


Last modified 2024-11-02

Valid HTML 4.01 Transitional

Cobra 21 (By Dynascan)

A picture of Cobra 21 (By Dynascan)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels / tuning steps:23
Mode:AM
Frequency control:XTAL-matrix
Frequency stability:0.005% @ -30 to +50°C (-22 to +122°F)
Clarifier or Delta tune:No
Power supply:13.8 VDC
Current drain / power consumption:RX: 300-650 mA
TX: Max 1.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):149*57*216 mm (5.88*2.25*8.5")
Weight:1.58 Kg (3.5 lb)
Other features:PA. ANL.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 11.275 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (10 dB S+N/N)
Squelch sensitivity:Less than 1 uV (Treshold)
Selectivity:4 KHz (-6 dB)
20 KHz (-40 dB)
Image rejection:30 dB
AF output power / speaker:2.5 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm), 8 ohm




TRANSMITTER SECTION
RF output power:~3.5 W (5 W input)
Modulation system:High and low level class B
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan (Early) and Taiwan (Later), 197x-197x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:
Related documents:User manual (3.6 MB)
Market / Approval: USA
FCC type accepted: No 21A
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -