RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Cobra logo


Copyright logo


Last modified 2024-11-02

Valid HTML 4.01 Transitional

Cobra 19 Ultra III

A picture of Cobra 19 Ultra III

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM
Frequency control:PLL
Frequency stability:0.005% @ -30 to +65°C (-22 to +149°F)
Clarifier or Delta tune:No
Power supply:13.8 VDC (Fixed power cord)
Current drain / power consumption:RX: 0.9-1.2 A
TX: Max 1.4 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):172*48*175 mm (6.75*1.88*6.88")
Weight:1.47 Kg (3.25 lb)
Other features:PA. Channel 9 switch.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: ? MHz
2nd IF: ? KHz
Sensitivity:1 uV (10 dB S+N/N)
Squelch sensitivity:
Selectivity:7 KHz (-6 dB)
10 KHz (-60 dB)
Image rejection:60 dB
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:TS "Minijack" (3.5 mm)




TRANSMITTER SECTION
RF output power:4 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:China, 2005-20xx (Discontinued)
Main PCB:
Sub PCBs:
Additional info:
Related documents:User manual (538 KB)
Market / Approval: USA
FCC ID: BBO19DXIV
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
HG-A1000
HG-A1500
HG-M73
HG-M75
HG-M77
HG-M84
HG-M84W
HG-S100
HG-S300
HG-S500
53.3 cm (21") base loaded magmount antenna
96.5 cm (38") base loaded magmount antenna
Replacement dynamic microphone
Power microphone
Noise cancelling microphone
Premium noise cancelling microphone
Premium noise cancelling microphone, wood grain
External speaker
Noise cancelling external speaker
Noise cancelling speaker with talk back
A rear picture of Cobra 19 Ultra III