RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Cobra logo


Copyright logo


Last modified 2024-11-04

Valid HTML 4.01 Transitional

Cobra 146 GTL (By Dynascan)

A picture of Cobra 146 GTL (By Dynascan)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:27.965-27.405 MHz
Channels / tuning steps:40
Mode:AM / SSB
Frequency control:PLL (uPD2824C)
Frequency stability:0.001%
Clarifier or Delta tune:±1 KHz "Voice lock"
Power supply:13.8 VDC (Male 3-pin jack)
Current drain / power consumption:RX: ? mA
TX: Max ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):185*58*231 mm (7.28*2.28*9.08")
Weight:2.04 Kg (4.5 lb)
Other features:PA. ANL/NB.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 10.695 MHz
Sensitivity: AM: 1 uV (10 dB S+N/N)
SSB: 0.5 uV (10 dB S+N/N)
Squelch sensitivity:Less than 1 uV (Treshold)
Selectivity: 4.2 KHz (-6 dB)
SSB: 7 KHz (-60 dB)
Image rejection:65 dB
AF output power / speaker:2.5 W at 10% distortion / 16 ohm
External speaker connector:TS "Minijack" (3.5 mm), 4-8 ohm




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system: AM: High- and low-level Class B
SSB: Balanced
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Taiwan (Early) and Philippines (Later), 1978-199x (Discontinued)
Main PCB:PC-833AD by Uniden
Sub PCBs: PC-266AA - Mic jack board
PC-834AA - Check point/shorting bar board
PC-839AD - Control board
Additional info:
Related documents: User manual (6.6 MB)
Service manual (7.8 MB)
PLL: uPD2824C
RF driver: 2SC2166
RF final: 2SC1969
Market / Approval: USA (Early)
FCC Data: 146GTL
USA (Later)
FCC ID: BBO3K2 146GTL
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Cobra 146 GTL (By Dynascan)