RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Cobra logo


Copyright logo


Last modified 2024-10-29

Valid HTML 4.01 Transitional

Cobra 135 XLR (By Dynascan)

A picture of Cobra 135 XLR (By Dynascan)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM / SSB
Frequency control:PLL (Multiple discrete IC's)
Frequency stability:0.001% @ -30 to +50°C (-22 to +122°F)
Clarifier or Delta tune:AM: ±1.5 KHz. SSB: ±1 KHz "Voice lock"
Power supply:Mains: 108-132 VAC
or 11.7-15.9 VDC
Current drain / power consumption:RX: 0.5-1.5 A @ 13.8 VDC
TX: Max 3 A @ 13.8 VDC
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):340*130*298 mm (13.39*5.12*11.73")
Weight:6.49 Kg (14.3 lb)
Other features:PA. ANL/NB. SWR-meter. Flip clock.




RECEIVER SECTION
Receiver system: Singel conversion superheterodyne
IF: 7.8 MHz
Sensitivity: AM: 0.5 uV (10 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
Squelch sensitivity:Less than 0.5 uV (Treshold)
Selectivity:AM/SSB: 3.8 KHz (-6 dB)
10 KHz (-50 dB)
Image rejection:50 dB
AF output power / speaker:3 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm), 8 ohm




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:AM: High- and low-level Class B
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-197x (Discontinued)
Main PCB:By Toshiba
Sub PCBs:
Additional info:
Related documents:User manual (8.5 MB)
Approval / Market: USA
FCC data: 135XLR
Sams Photofact #:CB-181 (April 1978)
Modifications and fixes:
Reviews:
Options / Accessories:
- -