RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Copyright logo


Last modified 2022-04-12

Valid HTML 4.01 Transitional

Apollo AP-708

A picture of Apollo AP-708

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:27.015-27.225 MHz (Old Australian bandplan)
Channels / tuning steps:18 (Old Australian bandplan)
Mode:AM / SSB
Frequency control:PLL (PLL02A)
Frequency stability:?%
Clarifier or Delta tune:? Hz
Power supply:Mains: 240 VAC (Fixed power cord)
or 13.8 VDC(3-pin connector)
Current drain / power consumption:RX: ? mA @ 13.8 VDC
TX: ? A @ 13.8 VDC
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):400*121*311 mm (15.75*4.76*12.24")
Weight:6 Kg (13.23 lb)
Other features:PA. ANL/NB. Tone hi-cut. SWR meter.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB)
1st IF: 10.695 MHz
Double conversion superheterodyne (AM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:
FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 5-pin DIN (180)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 19xx-19xx (Discontinued)
Main PCB:PTBM058COX by Cybernet Electronics Corporation
Sub PCBs: PTPW007COX - AVR/PSU board
and others...
Additional info:
Related documents:PLL: PLL02A
Sams Photofact #:
Modifications and fixes:
Reviews:
Options / Accessories:
- -