RigPix logo

Belcom logo


Back to main

Back to Belcom

Next mobile VHF/UHF


Copyright logo


Last modified 2023-01-17

Valid HTML 4.01 Transitional

Belcom Liner 2

A picture of Belcom Liner 2

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range:144-146 MHz
(XTALs for 144.100-144.330 MHz factory installed)
Tuning steps:10 KHz + VXO (±6 KHz)
Frequency stability:? ppm
Mode:USB
Channels / memory management: 24 (XTAL matrix)
Repeater shift / offset:No
Power supply:12-16 VDC
Current drain / power consumption:RX: 45-440 mA
TX: Max 2.2 A
Antenna impedance / connector:52 ohm / SO-239
Dimensions (W*H*D):220*70*250 mm (8.66*2.76*9.84")
Weight:3 Kg (6.61 lb)
Other features:NB. RIT.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 28 MHz
2nd IF: 7.8 MHz
Sensitivity:0.5 uV (10 dB S/N)
Selectivity:2.4 KHz (-6 dB)
6 KHz (-60 dB)
Image rejection:60 dB
AF output power / speaker:2 W at ?% distortion / 4 ohm
External speaker connector:6.3 mm, 4-8 ohm




TRANSMITTER SECTION
RF output power: Max 10 W (PEP)
Modulation system:Balanced
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 3-pin (6.3 mm)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1971-197x (Discontinued)
Additional info:
Related documents:User manual (5.8 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
?
?
LSB unit
Preamp, 2 dB NF