RigPix logo

AOR logo

Back to main

Back to AOR

Next receiver/scanner

Copyright logo

Last modified 2018-06-24

Valid HTML 4.01 Transitional

AOR AR-7030 Plus

A picture of AOR AR-7030 Plus


Type:HF receiver
Frequency range:0-32 MHz
Tuning steps:Minimum 2.655 Hz (SSB/CW)
Minimum 10.62 Hz (AM/FM)
Mode:AM / AM-Sync / FM / SSB / CW / Data
Channels/memory management:400 regular
3 setup
Power supply:12-15 VDC (2.1 mm barrel connector, center positive)
Current drain/power consumption:0.3-1 A
Antenna impedance/connector:50 ohms or Hi-Z whip / SO-239
600 ohms / Spring terminals
Dimensions (W*H*D):238*77*191 mm (9.37*3.03*7.52")
Weight:2.2 Kg (4.85 lbs)
Other features:Clock and timer. RS232C. PBT. IR remote controller.

Receiver system:Double conversion superheterodyne
1st IF: 45 MHz
2nd IF: 455 KHz
Sensitivity: AM (10 dB S+N/N. 5.5 KHz filter, preamp on)
0.54-1.8 MHz: 0.33-0.38 uV
1.8-32 MHz: 0.38-0.43 uV
FM (12 dB SINAD. 10 KHz filter, preamp on)
28-32 MHz: 0.48 uV
SSB/CW/Data (10 dB S/N. 2.2 KHz filter, preamp on)
0.02 MHz: 1.4 uV
0.1 MHz: 0.34 uV
0.5-1.8 MHz: 0.18-0.21 uV
1.8-32 MHz: 0.21-0.24 uV
Selectivity: Defaults:
AM: 5.5 KHz (-6 dB), 9.1 KHz (-60 dB)
FM: 10 KHz
SSB/CW/Data: 2.3 KHz (-6 dB), 3.34 KHz (-60 dB)
A 7 KHz filter is also selectable
Image rejection:
AF output power/speaker:2.2 W at ?% distortion / 8 ohms
External speaker connector:3.5 mm, 8 ohms

Manufactured:UK, 1997-200x (Discontinued)
Additional info: Improvements over the previous version include some better components, new
CPU and firmware with provision for an optional function board.

New price 2001 in the US: $1799.00
Related documents: User manual (1.6 MB)
Plus addendum and NB7030 info (284 KB)
Crystal filter daughter board
Notch filter and noise blanker board
Telescopic whip
A rear picture of AOR AR-7030 Plus